Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
To place an order for your favorite items you need to:
1- Go to the page of your chosen product
2-Check the quantity if you would like to order more then one item.
3- Hit the "ADD TO CART" button to proceed to checkout
4- Select the billing method, provide shipping information, and E-mail address to receive confirmation.
5- Finally Confirm your order by clicking on "PLACE ORDER" and you will be directed to a payment page to complete your purchase.
6- After your payment is processed, you will receive a confirmation e-mail with the details of your purchase. Please refer family members and your friends
If you still cannot find the order confirmation please check SPAM/JUNK folder, please check your email addresses
contact our customer service team and they will be happy to assist you
Our customer support team will help you out and
ensure that you have received a confirmation email.
Our standard fitting for Single hole kitchen and bathroom faucets is 1.1/4"
The hole Size should be from 1.5/16" to 1.3/4". Recommended 1.3/8".
Our standard fitting for Water filter faucets is 3/8"
The hole Size should be from 1/2" to 1". Recommended 1/2".
Our standard fitting for Soap Dispenser is 1"
The hole Size should be from 1.1/16" to 1.3/8". Recommended 1.1/4".
If you would like to cancel the order within 30 minutes, after you will need to contact the us directly. Depending on the seller's policy,
You may be able to cancel the order and receive a full refund.
If the order has already shipped, you may not be able to cancel the order but you may still be able to return it for a refund.
You can cancel your order by sending an e-mail to info@maxfaucets.ca
requesting cancellation
Unfortunately, an order cannot be canceled once it has been processed by our warehouse. but you may still be able to return it for a refund,
Therefore, we sincerely request that you only make your purchase if you are absolutely sure you want the product.
Will it take me long to install a kitchen faucet? How much it will cost to replace a kitchen faucet? How much to install a new faucet?
Once the old faucet is removed, installing a new single hole faucet should take no more than 30 minutes.
The installation guide should provide you with the necessary instructions to do the job
correctly and efficiently, the installation instruction in the faucet box and videos gouid
installation available on our YouTube channel
But It depends on the type of faucet you are installing.
it may take about 1 hour install a basic faucet, However, if you are installing a more
complex faucet, it can take up to 1-2 hours to complete the installation.
It is recommended that you follow the installation instructions carefully and take your
time to ensure that you get it right the first time, Make sure to read the installation guide
that came with the faucet and watch the installation video available on our YouTube channel before you begin the installation.
Gather the necessary tools to complete the job and always wear safety glasses and gloves to protect yourself.
Before you leave the store with either your new faucet or the replacement part you need, make
sure you have these items to help install the faucet or part easily, for single hole faucet, to install
a kitchen faucet or remove the faucet or replacing a kitchen faucet, kitchen sink faucet, bathroom sink faucet.
These items are also listed on the MAX Faucets installation guide: Screwdrivers Adjustable Wrench
(or basin wrench for hard to reach areas) Flashlight Pliers Plumber's Putty (not required on all
installations) Thread seal tape Allen Wrench (not required on all installations)
You should also make sure you have a bucket, a rag, and a wrench that is suitable for the size of
nut or bolt you are removing,
Additionally, you may need to buy some specialized tools, such as a Basin Wrench,
a Tubing Cutter, or a special spanner wrench, depending on the type and complexity of your faucet.
It is also a good idea to have a pair of safety glasses on hand to protect your eyes from any
debris that may fly up during the installation process.
see more videos in our YouTube channel
If you would like to change your order, please contact customer service and provide your order number confirmation. They will be able to assist you in making changes to your order.
Please make sure you send us an email as soon as possible at support@maxfaucets.ca for any changes you would like to make (such as your shipping address).
The model number is on all Faucets packaging side.
some faucets and all installation instructions provided with your faucet.
On the packaging, look near the UPC code or the side of the box, Or On the faucet,
a model identification tag has been attached label to All models manufactured since 2019.
If you cannot locate the model identification tag or the installation instructions, you can contact our customer service team for assistance.
They will be able to provide you with all the necessary information to help you install your faucet. You can also find images of common models on our website by entering a search query.
If you need help, you can use the Customer Support at info@maxfaucets.ca
we will help you identify your product
We has developed quick-connect parts to fit the request for longer hoses 31.5"/80cm widespread hose for all one-handle kitchen and Bathroom faucets and lavatory widespreads. part number HM-91610M-80 CM. vegetable spray hose without sprayer
Remove the aerator, you will need some tall to take the aerator out after you can soak it in vinegar overnight, then flush with water. For stubborn deposits, rub with a toothbrush.
for assistant please contact us support@maxfaucets.ca
The flow restrictors required for aerators and shower heads can clog, resulting in greatly reduced flow rates,
Remove the aerator or shower head and make sure the flow restrictor is not clogged.
Additionally, flushing the system properly will help to reduce the possibility and frequency of
occurrences.
The tips below will help you avoid problems. please call a plumber
These procedures are a good idea to follow each time the water has been turned off for repairs in your home.
The flow restrictors required for aerators and shower heads can clog, resulting in greatly reduced
flow rates.
Remove the aerator or shower head and make sure the flow restrictor is not clogged.
Additionally, flushing the system properly will help to reduce the possibility and frequency of
occurrences.
The tips below will help you avoid problems.
These procedures are a good idea to follow each time the water has been turned off for repairs in your home.
TO FLUSH A KITCHEN OR LAVATORY FAUCET:
Remove aerator and black sealing gasket above it Turn faucet handle(s) to full on hot and cold
mixed position(s) and flush lines for two minutes before turning off water with handle(s) Replace
aerator
TO Flush a tub / Shower faucet:
Remove shower head if applicable Turn handle(s) to full on hot and cold mixed position(s) Flush
spout two minutes without moving handle(s) If you have a shower head, divert water to it and
flush for two minutes
BE SAFE! Make sure cold water flows FIRST and that the rotational handle limit stop is properly set.
See information on setting the adjustable limit stop.
Replace shower head Some debris and/or foreign material in the lines may be too large to pass
through the faucet whether it is a kitchen, lavatory or tub/shower faucet.
To remove this type of debris:
Turn off water supply to both hot and cold.
Remove all internal components.
Turn water supplies back on and let run for 30-60 seconds. (For kitchen and lavatory faucets turn
a bucket or similar large container upside down over faucet to deflect the water into the sink.)
Turn water supplies off again. Reassemble faucet
Turn water supplies back on.for decrease water flow rate you can adjust the two water supply
valve to reduce it 15%-25%.
This act mandated that all newly manufactured faucets must be manufactured with a flow restrictor,
which limits the water flow to 2.2 gallons per minute, If you have an older model faucet, it may
not have a flow restrictor, but you can purchase one and install it yourself. Additionally, some
newer faucets have a built-in feature that allows you to adjust the flow rate.
To do this, simply turn the knob on the side of the faucet to increase or decrease the flow of water.
This law placed strict regulations on flow rates.
All manufacturers must adhere to these standards and no adjustments can be made. In some cases, you may be receiving less than the maximum allowable water flow rate. Normally, this is due to low water pressure, a blockage in the plumbing or in the faucet, or a faucet malfunction.
If you believe that you are getting less than the maximum allowable water flow rate, you should
contact a plumbing professional to inspect your faucet and identify any potential issues.
The professional may be able to replace any faulty parts, clear any blockages, or adjust the water pressure.
If the cause of the reduced water flow rate is due to the Energy Policy Act, then unfortunately,
no adjustments can be made to increase the flow rate,
Removal of this will actually diminish performance. for decrease water flow rate you can adjust the two water supply valve to reduce it 15%-25%.
Our showerheads also feature a non removable flow regulator that helps to maintain a consistent
water flow rate regardless of any changes in water pressure
To further reduce water flow rate, you can adjust the two water supply valves to decrease it by 15%-25%. This will help you save water, reducing your water bills and helping to protect the environment.
Always blot dry any water from the faucet surface.
Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water.
Make certain that you rinse the surface thoroughly with water afterward.
Avoid using the following which can damage your finish:
Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
Avoid harsh abrasives or polishes. Avoid bleach-based cleaners.To determine the parts you need, contact your MAX Faucets to assist you support@maxfaucets.ca
During the first few days you use your faucet, a small amount of debris may be flushed out of your
pipe system. This happens even though the plumber flushes the pipes before completing work on
your home, In addition, particles of solder, copper chips, plumber's tape and other installation
materials can get caught in aerators and showerheads. Occasionally, a chip might damage the
valve seat that provides the watertight seal. The tips below will help you avoid problems.
It's a good idea to follow these procedures each time the water has been turned off for repairs in
your home, It’s a good idea to flush the lines at least once a year.
Remove the aerators and showerheads, and flush with a garden hose to remove any debris that
may have collected. If you notice a decrease in water pressure, it may be a sign that something
is blocking the line, If this happens, flush the lines thoroughly and inspect the valve seat for damage. If the valve seat is damaged, you may need to replace it.
TO FLUSH A KITCHEN OR BATHROOM FAUCET:
1-Remove aerator and black sealing gasket above it.
2-Turn faucet handle(s) to full on hot and cold mixed position(s) and flush lines for two minutes before turning off water with handle(s).
3-Replace aerator.
TO FLUSH A TUB Spout / SHOWER HEAD:
1-Remove shower head if applicable
2-Turn handle(s) to full on hot and cold mixed position(s).
3-Flush spout two minutes without moving handle(s).
4-If you have a showerhead, divert water to it and flush for two minutes.
BE SAFE! Make sure cold water flows FIRST and that the rotational handle limit stop is properly set. See information on setting the adjustable limit stop.
5-Replace shower head
If problems persist, flush the faucet and lines using these instructions:
1-Turn off water supply to both hot and cold.
2-Remove all internal components.
3-Turn water supplies back on and let run for 30-60 seconds. (For kitchen and lavatory faucets turn a bucket or similar large container upside down over faucet to deflect the water into the sink.) Turn water supplies off again.
4-Reassemble faucet
5-Turn water supplies back on.
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits,
Cleaning with a damp non abrasive sponge and buffing it dry with a clean soft cloth should help
keep your product looking beautiful, To remove water spots, use warm water and a soft, damp
cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water.
Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household
cleaners: Original Glass Cleaner, Formula 409 or Windex® Anti bacterial All Purpose Cleaner,
Fantastik All Purpose Cleaner, when used according to the manufacturers instructions for use.
For stubborn stains, use a soft-bristled brush or toothbrush in conjunction with one of the above
cleaners. When you are finished, rinse the entire surface with warm water and dry with a soft
cloth. It is important to be gentle and not to use abrasive sponges, brushes or other abrasive
cleaning products as this may damage the finish. If in doubt, always test the product in an
inconspicuous area first to ensure it does not damage the finish.
*Avoid using the following which can damage your finish:
*Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green
Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin
Tub, Soft Scrub, and Tile Cleaner.
*Avoid products that state on the label that they remove tarnish and rust, and those containing
hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
*Avoid harsh abrasives or polishes Avoid bleach-based cleaners
Many stores can order MAX faucets that are not stocked or displayed in the store. Ask the online department manager or store manager for assistance with MAX Faucets special orders.
You also can preview a large assortment of MAX Faucets models in many finishes in the Online Stores. Contact MAX Faucets to assist you info@maxfaucets.ca
If the finish on your polished faucet is beginning to look dull and/or is peeling, this is likely due to the accumulation of dirt, soap, and water spots over time. To restore the clean and polish, shine, you can use a mild cleaner and a soft cloth to buff the finish. If the finish is severely damaged, you may need to replace the faucet parts that are most visibly affected.
To determine the parts you need, contact your MAX Faucets to assist you info@maxfaucets.ca
These pinholes are likely the result of mineral deposits that have built up in the spout over
time, To clean the pinholes, you can try soaking the spout in vinegar or a solution of
water and baking soda. You can also use a toothpick or a cotton swab to remove any
stubborn deposits. If the problem persists, you may need to replace the spout.
Pin holes in a MAX faucet spout are usually caused by dezincification, which is the
process of zinc coating the spout wearing away
Dezincification can be prevented by regularly cleaning the spout with a vinegar and
water solution to remove mineral deposits and rinse away any debris.
If you have a brass finish spout, a mild brass cleaner can be used to help keep the finish
looking new, removal of zinc from the brass due to salt solutions, brackish water, mildly
acidic solutions and poorly grounded plumbing systems. When the zinc is removed, the copper is redeposited to these areas and the surface of the part.
This process of dezincification can be accelerated by the presence of chlorine in the
water supply, so it is important to make sure your water is filtered properly before it enters
your home, Additionally, it is important to check the spout regularly to make sure there is
no corrosion occurring.
If the spout begins to corrode or if pinholes appear, it is important to replace the spout as
soon as possible to prevent further damage.
The redeposited copper is a weak mass that is porous and fragile.
If this has happened, you will need to replace the spout.
To determine the spout part number for your faucet model, contact your MAX Faucets
assistant, or e-mail us: support@maxfaucets.ca
Yes, you can join copper to PVC tubing.
To do this, you will need to use a special transition fitting that is designed to connect
the two materials.
Depending on the size of your tubing, you may also need to use a metal insert as well as
special cement that is designed for use with PVC tubing.
Make sure to read and follow the instructions carefully when using these materials,
Yes. plastic PVC (Polyvinyl-Chloride) tubing can be joined to copper using "grip fittings"
Each side of a grip fitting contains a narrow grip ring and a plastic compression ring
(or rubber O-ring) that forms the seal.
Tips:
Use penetrating oil to help loosen corroded mounting nuts.
Use a hacksaw for cutting steel or plastic pipe.
Use a basin wrench for those hard to reach areas.
Use a tubing cutter to make straight, smooth cuts in plastic and copper tubing.
Wrap thread seal tape clockwise around threaded joints to ensure a tight seal.
Apply the thread seal tape generously and evenly around the threads, making sure
there are no gaps. For additional protection against leaks, use pipe dope or Teflon
paste on the threads before attaching the fitting. When tightening the nut, make sure
to turn it slowly and evenly to avoid any damage to the threads. Once the nut is
securely fastened, check the seal for any signs of leakage. If a leak is detected,
simply tighten the nut a bit more and recheck
You can purchase replacement parts online or through our local store. If you are unsure of the exact part you need, you can contact us to get assistance in finding the right part.
There are three ways you can purchase repair parts.
One way online through MAX Faucets.com or MAX Faucets.ca
Another way is to purchase them at our local store. Lastly, you can also order them over
the phone, We provide shipping and delivery services for orders placed through the MAX Faucets online store.
We can also provide technical support in helping you identify the right part for your needs, Faucets website Service & parts section.
Second, is through our showrooms.
Third, is by calling our Consumer Services Center at
Toll-Free: +1-888-827-1191
Phone: 647-470-2275 | 289-291-3900
Hours: Monday-Friday | 9AM-6PM (Eastern Time).
Saturday | 10AM-3PM (Eastern Time).
Sunday | Closed
Email: info@maxfaucets.ca
MAX Faucets typically ships orders within 1-3 business days.
Depending on your location, transit time will vary. You can check the estimated delivery
time for your order in your shopping cart
Stocked items will arrive within 4- 8 business days, If you need your part to arrive sooner,
we do offer expedited shipping.For expedited shipping, orders will arrive within 2 business
days, Please note that expedited shipping is only available on orders placed before 12 pm
Eastern Standard Time.For orders placed after 12 pm Eastern Standard Time, they will
arrive within 4-8 business days, If you need your part even sooner, please contact our
Customer Service team and they will be able to provide you with further assistance
Can I change my single-handle knob faucet to a lever?
Yes, you can change your single-handle knob faucet to a lever, However, you should
make sure you have the correct parts and tools before you start the installation process.
Depending on the type of faucet you have, you may need additional components such as
an adapter, escutcheon plate, or a valve stem, Additionally, you should turn off the water
supply before starting the installation, Once you have all the parts and tools ready,
you can begin the installation process. Follow the instructions provided with the new
lever faucet or consult a professional plumber if needed, It’s important to ensure that the
parts are properly installed and connected before turning the water supply back on.
After the installation is complete, you should check for any leaks or other issues.
Single-handle lavatory and tub/shower models can be converted from a knob handle to
a lever handle, However, the "action" of a lever handle differs from a knob handle,
so you will also need a different valve in your faucet for the lever handle to operate
properly, A single-handle faucet converted from knob handle to lever handle will operate
slightly differently from an "original equipped" lever model. for assistance, info@maxfaucets.ca
Normally, finish deterioration is due to years of wear and tear, abuse or chemical attack.
The finish cannot be repaired once damaged; however, you can replace many of common
faucet parts where the finish deterioration is most noticeable.
To determine the parts you need, contact your MAX Faucets .for assistance, info@maxfaucets.ca
You can try tightening the screws on the handle with a screwdriver. You can also try using a thread sealant or plumber's tape to help secure the handle. If that does not work, you may need to replace the handle or the entire faucet.
One solution is to try tightening the screws on the handle. If this doesn't work, you may need to replace the handle altogether. You can also try using a thread-locking adhesive to keep the screws in place, If the handle is plastic, you may need to replace it with a metal handle, as plastic handles can be more prone to loosening, With time and use, the set screw on a handle may loosen up.
Using a hex wrench or allen key will allow you to re tighten the set screw in the handle.
If the set screw is too loose or will not stay in place, you may need to replace the handle. If you are replacing the handle, it is important to choose a handle that is compatible with the faucet. It is also important to make sure that the handle is securely attached to the faucet before using it.
You can use a thread-locking adhesive to help keep the screws in place. Replacing the entire faucet may be necessary if the handle or any other part is too damaged to repair,
In this case, you should consult a professional plumber to make sure the new faucet is properly installed.
Your faucet came with the correct hex wrench. If you can’t find the hex wrench that came with your faucet, most single handle kitchen faucets will use a wrench
if this doesn't fix the situation, you may want to loosen the set screw and reseat the handle on the stem to make sure it is lined up properly.
Once corrected, you may re-tighten the handle to the stem unit and it should work normally
for assistance, info@maxfaucets.ca
We carry many parts for discontinued models; however, there are exceptions. To determine if we have the part you need, we will ask you to provide the age of your faucet and the model number or photos if you don't know your model number. No, it doesn't mean that at all, We are constantly updating our website and may simply not have added your faucet yet, Please contact us directly if you would like to verify if we can still service your faucet.
Once we have the information we need, we will be able to tell you if we have the parts you need to service your faucet. We may be able to provide you with a replacement faucet if the part is no longer available. Please don't hesitate to contact us if you have any more questions or would like to inquire about parts availability.
Contact your MAX Faucets for assistance, info@maxfaucets.ca
You can expect to be asked questions about the model of the faucet, a detailed description of the problem, and your contact information. Additionally, you may need to provide a receipt or proof of purchase to confirm the warranty.
Also may ask you for information such as the model and serial number of your faucet, the date of purchase, date of installation and details of the issue you are having with the product,
Contact US,for assistance, info@maxfaucets.ca
Leaks and drips from a faucet or shower usually result from a worn-out or damaged cartridge or valve. Worn or damaged washers or seals can also cause the faucet to leak.
It is also possible for a faucet to leak if the handle is not completely shut off. Corrosion of the valve seat can also cause the faucet to drip. In some cases, mineral deposits can build up and clog the valve, resulting in a dripping faucet.
In order to fix a leaky faucet or shower, the worn-out or damaged cartridge or valve should be replaced. In addition, the washers or seals should be replaced if they are worn or damaged.
If the handle is not completely shut off, it should be adjusted and tightened. If the valve seat is corroded, it should be cleaned or replaced. Lastly, if mineral deposits are clogging the valve, it should be cleaned or descaled.
Without a specific model number, it is hard to determine the exact cause of a leak.
In general, leaks are often caused by a scratched or torn cartridge, O-ring, or grommet, Typically,
a cartridge, replacement will correct this type of leak.
contact your us for assistance, info@maxfaucets.ca
This product is designed to fit all types of faucets and requires no special tools for installation.
The Hose Quick Connect is made of the highest quality materials and is designed to last for years.
It is also backed by MAX Faucets for limited warranty. Installation is easy and quick, and the hose is designed for a secure, leak-free connection. Order Now
To replace the faucet cartridge, first shut off the water supply to the faucet by turning off the valves under the sink. Then use a wrench to unscrew the handle and remove the cap, Next, unscrew the bonnet nut and remove the cartridge from the faucet.
Finally, replace the cartridge with a new one by reversing the steps above. Once the new cartridge is installed, turn the water back on and test the faucet to make sure it is working properly.
We Have use a few different cartridge styles you can find it on the MAX Faucets website. contact MAX Faucets assistant, E-mail : info@maxfaucets.ca
You can find assistance in repairing your MAX Faucet product by visiting the company website. On the company website, you will find a list of authorized service centers in your area. Additionally, you can contact the company directly through their customer service line, or you can find helpful videos online that can walk you through the repair process.
If you should happen to require assistance with repair of your MAX Faucets product, please contact us at +1-888-827-1191 or through the contact us section of the website.
Yes, you can connect a portable dishwasher or water filter to your kitchen faucet.
However, you may need an adapter to do so. Additionally, you may need to ensure that the water pressure in your plumbing system is sufficient to support the dishwasher or water filter, You can connect a portable dishwasher or water filter to any MAX Faucets kitchen faucet that is not a pull-out or pull-down design.
Never connect a portable dishwasher to pull-out or pull-down kitchen faucets, as potential pressure fluctuations during dishwasher operation may result in the hose rupturing.
Some MAX kitchen faucets have a cache, or hidden, aerator for design purposes.
If your model has a cache (hidden) aerator, you will need to order an adaptor to adapt the internal threads to standard 9/16 T-adapter male threads in order to connect the dishwasher.
Pinch together at the base of the Blue/black plastic button, next to the hose. The top halves will spread apart. Pull down gently. Release tabs from the brass connector.
Pinch the button and Pull down the hose until it is fully disconnected. Make sure to hold the brass connector so it does not fall off. After the hose is disconnected, you can safely remove the Quick Connection hose from the appliance.
Please visit our Youtube channel to watch a video link
First, you need to turn off the water supply to the faucet. Then, disconnect the existing faucet from the sink by unscrewing the mounting nuts.
Next, attach the new faucet's mounting plate to the sink and secure it with the mounting nuts. Then, place the faucet in the mounting plate and attach the water supply lines. Finally, turn the water supply back on and test the new faucet to make sure it is working properly.
If the faucet is working properly, you can add the handles and other accessories to complete the installation. Finally, check for any leaks and tighten any loose connections. Your new faucet should now be fully installed and ready to use!
welcome to our YouTube videos take a tour
You can determine which handles will fit on your kitchen faucet by measuring the size of your faucet and comparing it to the size of the handles. Be sure to also check if the handles are compatible with your type of faucet, such as compression, cartridge, ball, or disc.
o determine which handles will fit on your kitchen faucet, you will need to measure the diameter of your faucet stem and compare it to the size of the handles you are considering. If the handle is too large or too small, it will not fit properly.
Additionally, for the single handle faucets you will need to measure the length of the stem to make sure that it inappropriate for the handles you are considering, You can also check to see if the handle requires a set-screw or a mounting nut to secure it to the handle faucet stem.
Make sure that the handle is compatible with the type of stem your faucet has. Finally, check to see if the handles require additional parts, such as a washer or screw, to complete the installation.
Once you have determined the measurements, you can then purchase handles that will fit your kitchen faucet.
One solution is to try tightening the screws on the handle. If this doesn't work, you may need to replace the handle altogether. You can also try using a thread-locking adhesive to keep the screws in place, If the handle is plastic, you may need to replace it with a metal handle, as plastic handles can be more prone to loosening, With time and use, the set screw on a handle may loosen up.
Using a hex wrench or allen key will allow you to re tighten the set screw in the handle.
Your faucet came with the correct hex wrench. If you can’t find the hex wrench that came with your faucet, most single handle kitchen faucets will use a wrench
if this doesn't fix the situation, you may want to loosen the set screw and reseat the handle on the stem to make sure it is lined up properly.
Once corrected, you may re-tighten the handle to the stem unit and it should work normally
contact MAX Faucets to assist you info@maxfaucets.ca
Our kitchen faucets come with a wide variety of mounting. Single-handle faucets are available that mount through 1 hole required. or number of holes 2-5 holes faucets, some model you can use a cover plate.
also you can choose between a wide selection of faucet types of faucet pullout kitchen faucets, pulldown kitchen faucets
and bridge kitchen faucets, If your existing faucet is covering up the holes, you can look under the
sink to see how many hole
your kitchen sink have.
Yes, you can convert a non-spray faucet to a sprayer model. You will need to purchase a sprayer attachment nozzle for the faucet and then follow the installation instructions for your particular model. Be sure to turn off the water supply before beginning the installation.
Some model Unfortunately No, kitchen faucets with hose and sprays have different mechanical and valve bodies than non-sprayer models.
Yes, you can use one hole instead. Depending on the type of faucet you have, you may need dick plates or use a different type of mounting bracket. You may also need to purchase a different type of sink strainer to fit the single hole.
Check our Service & Parts
Pull out kitchen faucets have a flexible hose that can be pulled out of the faucet body. This type of kitchen faucet is often used to fill large pots and pans and is great for multitasking.
Pull down kitchen faucets have a spray head that pulls down from the faucet body and is great for rinsing dishes and cleaning the sink. The spray head on a pull down faucet can also be adjusted for different water pressures and temperatures, Our products of pullout kitchen faucets collection comes with pullout sprayer hose (150cm) allows you to reach all areas of your kitchen sink. and pulldown kitchen faucets its build with different mechanism for just enough to pull down
Smart touch kitchen faucet single handle pull-out sprayer, kitchen faucet is finished in a stylish that is sure to turn heads. The single handle design makes it easy to adjust the temperature and water flow with just one hand. This faucet is perfect for any modern kitchen, bringing both style and convenience to your home.
Smart Touch Kitchen Faucet S11 IS A Sensor Technology contact with the faucet spout, A Simple Touch Anywhere On The Spout Will Start And Stop The Flow Of Water.
Sometimes your Hands Could Use a Hand Whether you have two full hands or messy fingers, Smart Touch Pull-Out Kitchen Faucet S11 Technology helps keep your faucet clean, even when your hands aren’t. Open the Kitchen Faucet Handle And Simple Touch Anywhere on the Spout with your wrist or forearm activates the flow of water at the temperature where your faucet handle is set.
Experience the convenience and control of MAX kitchen faucets featuring Touch S11 Technology.
Yes, four AA batteries are required for the Smart Touch Kitchen Faucet S11 Technology work as a smart faucet hand free to work. Instead, if an electric receptacle power source is available, you can get a MAX adaptor AC/DC. This MAX adaptor AC/DC allows the faucet to be plugged into an electrical outlet, eliminating the need for batteries. This adaptor also enables the faucet to activate its auto-shutoff feature with greater accuracy
Yes, you will eventually need to change the batteries for your Smart Touch Kitchen Faucet S11. To do this, turn off the water supply, then unscrew the battery cover to reveal the battery compartment. Remove the old batteries, and replace them with new ones. Make sure to check the polarity of the batteries before inserting them into the compartment.
Finally, screw the battery cover back onto the battery box watch video here.
The betters will last as long 4-6 Months according to the using
Yes, You can but every technology is have different way
For Touchless S111 model # MB-12022- / model # MB13033 Please watch video click here
and for Touch S11 model # MY-2020 / MY-2022 / You can take out the sensor and connect the click connection hose strait to the faucets and when you need you can put back Please watch video click here
The Smart Touch-less kitchen faucets has a infrared Motion Sensor Touchless S111 A Simply wave your hand front of the motion Sensor to turn water on and off with just wave of your hand.
A pop-up drain assembly is a type of plumbing fixture typically found in bathroom sinks. It consists of a drain pipe, a stopper, and a lift rod. The stopper is connected to the lift rod, which is connected to a pivoting arm mounted to the underside of the sink. When you press down the lift rod, the stopper closes the drain, and when you pull up the rod, the stopper opens the drain. This type of drain assembly is common in bathroom sinks, but it can also be found in other types of sinks, such as Bathroom and bar sinks. A pop-up drain assembly is commonly used in bathroom sinks. A mechanical plug called a "pop-up stopper" is used to hold water in the sink. MAX Faucets offers lavatory faucets both with and without overflow pop-up bathroom Sink drain. please watch Installation video guide
Yes, you can use your existing drain assembly when installing a new bathroom faucet. However, you should make sure that it is compatible with the new faucet. Additionally, you should check that all of the components are in good condition and functioning properly. This will ensure that the new installation will be safe and secure. But if you're changing finishes, (i.e.,from chrome to brass), you'll probably want to change the pop-up drain assembly to match your new faucet colour finish
Yes, our MAX Faucets Drain standard fitting to fit most of the bathroom sinks and vessel sinks as well
On MAX Faucets Two-Handle lavatory faucet, if the handles rotate in the wrong direction, simply rotate the right stem stop assembly 180 degrees. This will change the rotation of the faucet handle to the other directionThis could be due to a problem with the faucet's internal components. Check to see if the handles have been installed correctly and that the water supply lines are connected properly. If all looks good, you may need to replace the internal parts of the faucet to get it working correctly.
Yes, you can replace a two-handle lavatory faucet with a single-handle model. You will need to remove the old faucet make sure that the single-handle model is compatible with the existing plumbing in your bathroom. Additionally, you may have to purchase additional parts such as adapters to ensure that the new faucet fits correctly.
Standard-size sink openings and faucet dimensions are used throughout the plumbing industry. However, since there are a few exceptions (such as 4" spread or 8" spread), it is a good idea to check sizes first. Then you can get a cover plate Part Number BM-XL2060- or BM-XL3090-you can match with your new one hole faucet.
Bathroom Sinks: Many single- and two-handle faucets are on 4-inch centers, which is the distance between the centers of the hot and cold inlets or mounting bolts. Another popular style for two-handle faucets is the 8" widespread. Adjustments.
No, not all faucets fit all bathroom sinks and tub/showers. Different faucets have different connections and mounting requirements, so it’s important to make sure that you get the right faucet for your sink or tub/shower. You need to check the measurements and specifications of your sink or tub/shower before you purchase a faucet to make sure that it will fit properly. It may be helpful to bring the measurements with you when you go to the store to buy the faucet. Additionally, it's important to check that the faucet has the right type of connection, as some sinks and tub/showers require special connections. If you are unsure of what type of faucet you should get, you can always ask a us for helpat info@maxfaucets.ca . Standard-size sink openings and faucet dimensions are used throughout the plumbing industry. However, since there are a fexceptions (such as 4" spread or 8" spread), it is a good idea to check sizes first. Then you can get a cover plate Part Number BM-XL2060- or BM-XL3090-you can match with your new one hole faucet. Bathroom Sinks: Many single- and two-handle faucets are on 4-inch centers, which is the distance between the centers of the hot and cold inlets or mounting bolts. Another popular style for two-handle faucets is the 8" widespread. Adjustments.
TIf a stopper does not lift straight out, it is being held in by the horizontal rod. Behind the drain pipe under the sink is a horizontal rod that is connected to the lift rod by a strap. The horizontal rod is held in place by a nut. Remove the nut and pull the horizontal rod straight away from the pipe about an inch. The stopper should now come free of the drain for an idei watch video click here. to remove your bathroom sink drain stopper for cleaning, you may need to first locate the screw or clip that holds the stopper in place. Depending on the type of stopper, you may need to use a flathead screwdriver or an Allen wrench to remove the screw or clip. Once the stopper is removed, you can then use a brush or other tools to clean it.
A pressure-balancing shower valve faucet is a type of shower faucet that is designed to maintain a constant water pressure, regardless of fluctuations in the water pressure from the incoming supply line. This ensures a consistent flow of water from the shower head, regardless of any changes in the pressure from the source. The pressure-balancing shower valve faucet works by using a diaphragm that is sensitive to pressure changes, which helps to regulate the water pressure and provide a constant flow, The diaphragm is connected to a valve that is located in the shower valve, which opens and closes in response to pressure changes, allowing the water pressure to remain constant,This type of faucet is beneficial as it helps to provide a more comfortable and consistent shower experience, regardless of any changes in the water pressure from the source. A pressure-balancing shower valve faucet balances incoming hot and cold water pressure to compensate for fluctuations in water flow. Balancing the water flow keeps shower temperatures constant and comfortable, within ±3°F (1°C) of the original temperature, despite other demands such as flushing the toilet or starting the dishwasher. MAX Faucets shower valves all feature pressure-balancing, Both valves require pressure on the hot and the cold side to operate.
Yes, you can purchase a new shower valve and you can replace it with your existing MAX Faucets shower valve. Make sure that the new valve is compatible with the existing plumbing system and that it fits in the same space as the old valve. You may also need to purchase additional components such as connectors, adapters, and fittings to complete the installation. Before you begin the installation, it is important to turn off the water supply to the shower valve. Once the water is off, you can carefully remove the existing valve. Take note of the orientation of the pipes and connections, as you will need to reconnect them in the same way when installing the new valve. Once the new valve is in place, you can turn the water back on and test the valve to make sure it is operating correctly.
If water continues to drip from the shower head for more than a minute, it may be a sign that something is wrong. You should check to make sure that the showerhead is properly tightened, that all the seals and gaskets are in good condition, and that there are no blockages in the pipes. If the problem persists, you may need to call a plumber to investigate further.
If you cannot find any obvious issues with the showerhead, plumbing fixtures, or pipes, it may be a sign of a more serious issue. You may need to have a professional check the water pressure, as this can cause a leak if it is too high. It is also worth checking the water heater to make sure it is working properly, as this can be a source of leaks.
If all else fails, it may be necessary to replace the showerhead or other components of the plumbing system.Replacing a showerhead or other components of the plumbing system can be a time consuming and expensive process, so it is important to take the necessary steps to identify the source of the problem before taking any drastic measures.
It is also important to make sure that any repairs are done properly and to any applicable safety standards. If you are not comfortable doing the repairs yourself, it is best to contact a professional plumber to ensure that the job is done correctly. Nothing is wrong with your faucet. The shower head is simply emptying its reservoir of water.
A vertical shower system spa is a type of shower system that utilizes a vertical, wall-mounted with multiple jets of water aimed at various points on the body.
It is designed to provide a relaxing and therapeutic experience through the use of water pressure, jets, and various massage settings.
Many vertical shower system spas also feature aromatherapy, chromotherapy, and steam functions, adding to the overall spa-like experience.
Vertical shower systems spas can be used to target specific areas of the body and help to provide relief from muscle tension and stress.
They also help to improve circulation, reduce inflammation, and provide a calming massage-like experience. Many of these systems are also equipped with adjustable water pressure, allowing users to customize the intensity of the massage. Additionally, some vertical shower system spas also come with a handheld wand for more direct targeting of specific areas of the body.
These features make vertical shower system spas ideal for those looking to relax, destress, and improve their overall wellbeing.
Whether you’re looking for an invigorating massage or a soothing spa-like experience, a vertical shower system spa can help you achieve the desired result.
With the various settings and adjustable water pressure, you can customize your experience to meet your needs and preferences.
Custom showers are showers that are designed and built to a customer's exact specifications. They can include a variety of features, such as multiple shower heads, body sprays, steam units, and more. They can be made from a variety of materials, such as tile, glass, or stone, and can be customized with a variety of colors, textures, and designs.
Custom showers can be an expensive luxury, but they can be a great way to add an elegant and unique touch to any bathroom.Custom showers can also be designed with a variety of safety features, such as non-slip floors, grab bars, and adjustable height shower heads.
They can also be designed to be wheelchair accessible, providing a safe and comfortable experience for all users. Additionally, custom showers can be designed to be energy-efficient, helping to reduce water and energy costs.The MAX Faucets Shower & SPA System is a semi-custom shower solution.
It features a shower head and two or four or six spray jets spray. You can add functionality by choosing and selecting additional the Jets Shower shower head, Shower, or hand shower.
If you don’t want to modify your existing plumbing, you can get a standard shower match with your rough-in which you can customize by simply choosing your own configuration options. You can also get a jetted shower, which can give you that spa-like experience without requiring a major overhaul of your entire bathroom.
See Your Shower Experience for more information on the options available. If you don't want to change your plumbing, you can get a shower head that attaches directly to the existing plumbing.
There are a variety of styles and finishes to choose from, such as rainfall, massage, or handheld shower heads. You can also get a shower enclosure that fits around your current plumbing and creates a dedicated showering space.Whichever type of shower you choose, you will need to ensure that your existing plumbing is compatible.
You may also need to replace the existing faucet with a shower valve to control the water flow. It may be worth consulting with a plumber to make sure that the installation is done properly and safely.
Toll-Free: 1 (888) 827-1191
Email: info@maxfaucets.ca
Monday - Friday 9:00 AM - 6:00 PM
Saturday 9:00 AM - 3:00 PM
Sunday Closed
© 2014-2024 MAX Faucets All Rights Reserved.